Virtual Library 
Video Library Video Library Results
WRATT III Introduction to Powder Coating Systems: Chapter 13: Powder Coating on Plastics
Chapter Abstract: This is clip 13 of 26 for this video. There are facilities that use in mold coating. A specially formulated powder is layered on the inside of the mold and forms a permanent bond with the SMC substrate. Powder coatings have been successfully applied to high warp resistant plastics. The powder coating industry is working to develop lower temperature cure powders which could be used with plastic without warping them in the heat.
Author: University of Tennessee Center for Telecommunications and Video / Center for Industrial Services
Publication Date: 1991
To Play:
You should have Internet access of 56kps or better and RealOnePlayer V2 Gold, which is available as a free download.
|
|
Other Chapters
Partially funded by: Nebraska Department of Environmental Quality, NDEQ |
 |
P2RIC is a member of the Pollution Prevention Resource Exchange, a national network of regional information centers: NEWMOA (northeast), ESRC (southeast), GLRPPR (Great Lakes), ZeroWasteNet (southwest), P2RIC (plains), Peaks to Prairies (mountain), WSPPN (Pacific southwest), PPRC (northwest). |
